Blade 400 crash

Threaded Mode | Linear Mode

Blade 400 crash

Author

Message

clavelg
Junior Member

Posts: 2
Group: Registered
Joined: Nov 2009
Status: Offline
Reputation: 0

Post: #1

Blade 400 crash

My rudder was out so I replaced it with a eflite EFLRDS75H and I am wondering how to set the servo arm relatively to the back rotor. At the moment I did not do a good job and the heli is going right or left.

11-12-2009 06:27 PM

Tombo242
Super Moderator

Posts: 53
Group: Super Moderators
Joined: Jun 2009
Status: Offline
Reputation: 0

Post: #2

RE: Blade 400 crash

Is this left or right turn happening without any input from you? i.e. Is it totally random? I think that we need more information if we are to help here.

Keep Smiling Smile

11-16-2009 07:59 PM

clavelg
Junior Member

Posts: 2
Group: Registered
Joined: Nov 2009
Status: Offline
Reputation: 0

Post: #3

RE: Blade 400 crash

Tombo242 Wrote:

Is this left or right turn happening without any input from you? i.e. Is it totally random? I think that we need more information if we are to help here.

I changed the servo and all is fine.

Tanks for the help.

11-22-2009 04:47 PM

green
Junior Member

Posts: 4
Group: Registered
Joined: Jun 2010
Status: Offline
Reputation: 0

Post: #4

RE: Blade 400 crash

My was Blade 400 crash so I had also changed the servo.
My problem was also solved.thanks to give advice.

______________________
Signature removed - Commercial link.

This post was last modified: 06-18-2010 04:27 AM by Tombo242.

06-09-2010 11:33 PM

« Next Oldest | Next Newest »

View a Printable Version
Send this Thread to a Friend
Subscribe to this Thread | Add Thread to Favorites